3 Series E36 328i (M52) SAL
The clearance on the left and right must be roughly the same. If
this is not the case, adjust the flat motor in its longitudinal direction
and then secure.
Model with hexagon guide in the drive disk:
bore out rivets in drive disk and remove both linkage assemblies.
Install linkage on new drive disk with pin (1) and retaining rings (2)
RA Removing and installing or replacing drive for sun roller blind
BMW AG - TIS
10.02.2013 03:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -