3 Series E36 328i (M52) TOUR
11 13 000
Removing and installing oil sump (M52 / S52 /
M52TU / M54)
Note:
To remove the oil sump, you must lower the front axle support.
There is no need to perform a front axle alignment check.
Remove intake filter housing with air-mass flow sensor.
Remove engine splash guard.
Drain engine oil.
Loosen guide tube for dipstick.
Remove oil return hose from cyclone oil separator on guide tube
for oil dipstick.
Pull out guide tube for oil dipstick.
RA Removing and installing oil sump (M52 / S52 / M52TU / M54)
BMW AG - TIS
09.02.2013 13:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
