3 Series E36 328i (M52) TOUR
Apply light coat of oil to connecting-rod bearing shells.
Fit bearing caps so that pair numbers match up.
Install new conrod bolts.
Tighten down conrod bolts with special tool 00 9 120 or special
tool 11 2 110.
Tightening torque 11 24 1AZ
.
Install oil pump.
If oil pump and oil scraper are two parts:
Fit oil scraper.
Assemble engine.
RA Removing and installing or replacing all pistons (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
09.02.2013 13:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
