3 Series E36 328i (M52) TOUR
11 36 550
Checking/replacing 4/2-way valve for VANOS
(M52/S52)
Switch off ignition.
Remove plug connection from VANOS adjustment unit.
Removing VANOS solenoid valve.
Installation:
Replace seal.
Tightening torque,
refer to Technical Data 11 36 1AZ
Move valve tappet back and forth: tappet must move freely.
Move plunger of hydraulic piston back and forth. Must be possible
to move hydraulic piston easily.
If hydraulic pistons prove difficult to move, the complete VANOS
adjustment unit must be replaced.
RA Checking/replacing 4/2-way valve for VANOS (M52/S52)
BMW AG - TIS
09.02.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
