3 Series E36 328i (M52) TOUR
Automatic transmission
Remove the suspension.
Note:
The transmission remains supported by the rear bearing.
Loosen the clamp on the exhaust bracket.
Installation:
After the installation of the exhaust system is complete, align
the exhaust bracket without tension.
Support the exhaust system using special tool 00 2 030 in
conjunction with special tool 31 2 220.
Disconnect rubber rings at centre mount.
Installation:
Check rubber gaskets for damage, replacing them if
necessary.
RA Removing and installing the complete exhaust system (M50/B25, M52/B28, S50)
BMW AG - TIS
09.02.2013 15:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -