3 Series E36 328i (M52) TOUR
Remove clamp (2).
Installation:
Install holder with long shoulder (3) facing forward.
Loosen screwed-on ring (1) several turns.
Installation:
After installation, tighten screwed-on ring (1) with special tool
26 1 040.
Tightening torque,
refer to Technical Data 26 11 3AZ.
Unscrew propeller shaft on transmission.
Installation:
Replace self-locking nuts.
Tightening torque,
refer to Technical Data 26 11 2AZ.
Version with joint disc, front:
Unscrew joint disk on transmission.
RA Removing and installing automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
09.02.2013 15:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
