3 Series E36 328i (M52) TOUR
Adjusting shift mechanism,
refer to 24 00 005.
Turn bayonet lock (1) counterclockwise.
Pull off plug (2).
Lift wire harness out of holder.
Installation:
Connect plug (2) that marks are aligned.
Pull plug (1) off speed sender.
Lift off cover from opening (1) on side of crankcase.
Using special socket 24 1 110, release three screws securing
torque converter to drive flange.
Turn flywheel for this step.
Installation:
Install screw, using special socket 24 1 110.
Tightening torque,
refer to Technical Data 24 40 1AZ.
Caution!
Only use original bolts.
RA Removing and installing automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
09.02.2013 15:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
