3 Series E36 328i (M52) TOUR
Engine M40:
Removing air collection box,
refer to MG 64.
Unscrew cable duct from rear end of engine.
Support engine at rear end before unscrewing cross member.
Mount special tool 00 0 200 and hook it into the eye on the
crankcase.
Tighten spindle (1).
Engine M51:
Remove cover from manifold.
Secure special tool 11 2 370 on intake pipe, rear.
Assemble special tool 00 0 200 and attach to special tool
11 2 370.
Tighten spindle.
Engine M43:
Attach special tool 11 8 022.
All:
Preassemble special tool 24 5 300 (fixture) to suit transmission
THM-R1 as marked.
RA Removing and installing automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
09.02.2013 15:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
