bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

16 RA Removing And Installing Automatic Transmission (A5S 310Z)|Page 955 > < 15 RA Removing And Installing Automatic Transmission (A4S 270R_ 310R)|Page 953
Page 1
background image

24 00 026

Removing and installing automatic
transmission (A5S 310Z)

Note:

After completion of work, check transmission oil level and
top up if necessary,

refer to 00 11 239 (A5S 310Z).

On vehicles with ASC+T, the throttle body (ASC+T) and/or
the expansion tank on the master brake cylinder can
become damaged when the transmission is lowered.

Remove throttle body (ASC+T).

refer to 13 54 060.

Disconnect battery,

refer to instructions on disconnecting and connecting
battery in MG 12.

Removing complete exhaust system, 

refer to 18 00 020.

Remove heat shield (1).

Remove brackets (1 and 2) for exhaust assembly mounting (only if
fitted).

Remove clamp (3).

Installation:

Install clamp (3) with long collar (4) at rear.

RA  Removing and installing automatic transmission (A5S 310Z)

BMW AG - TIS

09.02.2013  15:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

16 RA Removing And Installing Automatic Transmission (A5S 310Z)|Page 955 > < 15 RA Removing And Installing Automatic Transmission (A4S 270R_ 310R)|Page 953