3 Series E36 328i (M52) TOUR
Installation:
Check drive plate for breaks and cracks, replacing if
necessary.
Arrest flywheel with special tool 11 2 170.
Unscrew bolts.
Caution!
Clean threaded bores in the crankshaft.
Replace screws.
Tightening torque,
refer to Technical Data 11 22 1AZ.
Sheet Metal Flywheel Version (2):
Caution!
Keep to sequence of installation.
Sheet metal flywheel (2) has three indentations for the torque
converter mounting tabs.
When guiding the engine and transmission together the three
mounting tabs on the torque converter must be aligned with the
three indentations in the sheet metal flywheel.
Non-conformance leads to follow-up damage on the automatic
transmission.
Turning on the torque converter, or engine, is no longer possible
after guiding the engine and transmission together and would lead
to damage.
Turn the torque converter on the transmission until bore (1) faces
down perpendicular to the tab.
Screw special tool 24 2 300 into the tab.
RA Removing and installing automatic transmission (A5S 300J)
BMW AG - TIS
09.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
