3 Series E36 328i (M52) TOUR
24 20 001
Replacing O-ring for output flange
(A5S 300J)
Remove complete exhaust system,
refer to 18 00 020.
Remove propeller shaft from transmission and center
mount,
refer to 24 00 027.
Brace output flange with special tool 23 0 020.
Loosen stop nut (1).
Installation:
Replace stop nut.
Tightening torque, refer to Technical Data.
Lever O-ring (2) out using a scribe.
Installation:
Lubricate O-ring (2) lightly with oil and install it in the groove.
Note:
Check ATF level, refer to 24 00 027
RA Replacing O-ring for output flange (A5S 300J)
BMW AG - TIS
09.02.2013 16:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
