3 Series E36 328i (M52) TOUR
Without steering damper:
Loosen clamping straps and pull off bellows.
Installation:
Mount new sleeve with new clamping straps.
Caution!
Unbend lockplate with pliers (never with hammer) to avoid
damaging rack and bearing.
Insert rack as far as possible.
Unbend lockplate.
Unscrew tie rod using special tool 32 2 110.
Remove old sleeve and push on new sleeve.
Installation:
Replace lockplate (A or B).
If lockplate (B) (with spacer to limit steering angle) is installed, new
lockplate must also be fitted with a spacer.
RA Replacing bellows for steering gear on left or right
BMW AG - TIS
09.02.2013 18:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
