3 Series E36 328i (M52) TOUR
Adjust spare outer D-pillar and secure.
Weld up spare outer D-pillar.
Weld up spare outer D-pillar to connection point between outer D-
pillar / gutter.
Fit individual welding spots so close together that a continuous
seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Weld up spare outer D-pillar to connection point between outer D-
pillar / sub-frame with reinforcement plate.
Fit individual welding spots so close together that a continuous
seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
RA Replacing rear roof pillar (side panel removed) (touring)
BMW AG - TIS
09.02.2013 21:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -