3 Series E36 328i (M52) TOUR
Tighten left and right screws (1) back down.
Adjust lower section of trunk lid lock
(screws in lower section of trunk lid lock loosened to point where
they can be displaced):
Caution!
When gas pressure props are removed, unsecured trunk lid
drops without damping!
Close trunk lid, holding down the lock button to prevent the trunk
lid lock from engaging.
This enables lower section of trunk lid lock to adjust itself correctly.
Open trunk lid and secure to prevent it from dropping.
Caution!
When gas pressure props are removed, unsecured trunk lid
drops without damping!
Tighten screws (1) in lower section of trunk lid lock.
Reinstall gas pressure prop.
Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.
Screw in detent buffer until left and right sides of trunk lid locate
against detent buffers when closed.
Caution!
Trunk lid must not protrude above side panels otherwise
height adjustment can be distorted!
RA Adjusting trunk lid to fit (touring)
BMW AG - TIS
09.02.2013 21:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
