3 Series E36 328i (M52) TOUR
Unscrew linkage and unclip guide clips.
Installation:
Clip in guide clips of locking linkage correctly.
Disconnect central lock wire.
Unscrew bolts.
Installation:
Install screws with Loctite 270, (Sourcing Reference: BMW
Parts Service).
Tightening torque, refer to Technical Data 51 22 1AZ
Pull off plug and remove door lock.
Only replace:
Lift out locking device and remove actuator drive from central
locking unit.
Installation:
Check function.
RA Removing and installing / replacing door lock on left or right back door
BMW AG - TIS
09.02.2013 22:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
