bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Or Replacing Trunk Lid Lock And Support Bracket > < 1 RA Adjusting Tailgate Lock (touring)
Page 2
background image

Adjust lower section of trunk lid lock:

Close trunk lid, holding down the lock button to prevent the trunk
lid lock from engaging.

This enables lower section of trunk lid lock to adjust itself correctly.

Open trunk lid.

Tighten screws (1) in lower section of trunk lid lock.

Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.

Unscrew detent buffer until closed trunk lid abuts against left/right
detent buffers.

Caution!

Trunk lid must not be higher than side panels, otherwise
preload is applied during height adjustment!

RA  Adjusting tailgate lock (touring)

BMW AG - TIS

09.02.2013  22:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing Or Replacing Trunk Lid Lock And Support Bracket > < 1 RA Adjusting Tailgate Lock (touring)