3 Series E36 328i (M52) TOUR
Cut off old glue in body opening but for a thickness of approx. 0.5
mm.
Cut off old glue carefully with an universal knife (sharp as a razor
blade) to avoid damaging the paint finish in body opening.
Pull off adhesive tapes all round.
Caution!
To provide long-term corrosion protection, always touch up
damage to paintwork (scratches and large areas of damage),
refer to 51 31 ...
Only if rear window is reused:
Scrape glue residue off rear window with scraper (Sourcing
Reference: BMW Parts Service) to thickness of 0.5 mm.
Fit seal all round rear window and press down firmly.
Secure wires for rear window heating and antenna with adhesive
tape.
RA Removing and installing rear window (touring)
BMW AG - TIS
09.02.2013 22:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -