3 Series E36 328i (M52) TOUR
64 52 001
Replacing drive belt for air conditioning
compressor (M50, M52)
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
Remove underbody protection,
refer to 51 47 490
Loosen drive belt:
Insert Allen key in tensioning roller screw and turn slowly
clockwise. This compresses the tensioner, thus slackening the
drive belt. Remove drive belt.
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Caution!
It is essential to replace drive belt if it comes into contact with
hydraulic fluid.
Installation:
Note arrangement of drive belt
When installing drive belt, compress tensioning element and loop
belt over belt pulleys and check for correct position in grooves.
RA Replacing drive belt for air conditioning compressor (M50, M52)
BMW AG - TIS
10.02.2013 01:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
