3 Series E36 328i (M52) TOUR
65 99 ...
Test Mode for BMW Car Radio (Bavaria C Professional RDS)
"BAVARIA C PROFESSIONAL" radios contain a test mode, with which various types of internal information can be
displayed and various operating conditions set.
Starting Test Mode:
Press button "*", followed by simultaneously pressing buttons "8" and "0" within 8 seconds of switching on the unit. The
basic menu appears.
The entire test is menu controlled.
The available test functions can be interrogated via the basic menu.
Various codes for the different functions appear in the C-display for this purpose and these functions can be activated
by operating the relevant key located below the multi-function keyboard.
The different codes activate the following functions:
1.
SYN: Setting synthesizer to fixed frequencies
2.
ADW: Display of input values to the 8 analog-digital converters
3.
NF: Display of volume, bass, treble and fader values in sound control module in dB
4.
LCD: LCD test
5.
GAL: Activation of one of three GAL tables
6.
SN: Output of serial numbers and software status modes
7.
NAT: Setting the operating area (USA,EUR)
In addition, the software status of the front software (week and year) appears in the B-display.
The test is stopped by pressing the key below "END".
RA Test Mode for BMW Car Radio (Bavaria C Professional RDS)
BMW AG - TIS
10.02.2013 01:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
