3 Series E36 M3 (S50) CONVER
Remove coolant-air guide from alternator.
Unscrew nut from bottom-right engine mount.
Installation:
Tightening torque, refer to Technical Data 11 81 1AZ.
Unfasten ground strap on engine support.
Lower vehicle.
Unscrew nut from bottom-left engine mount.
Installation:
Tightening torque, refer to Technical Data 11 81 2AZ.
Remove hydraulic container from engine support arm.
Leads remain connected!
RA Removing and installing engine (S50)
BMW AG - TIS
09.02.2013 20:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
