3 Series E36 M3 (S50) CONVER
11 14 110
Removing and installing, sealing or replacing
timing case cover (S50 / S54)
Special tools required:
•
00 0 200
Note:
Illustrations show the S50.
The procedure is identical for the S54.
Unscrew oil sump.
Note:
After removing oil sump, reinstall front axle support
provisionally and remove special tool 00 0 200 .
Remove cylinder head.
Remove vibration damper.
Remove radial seal.
Note:
Install new radial seal only after installing timing case cover.
S50 only
If necessary, remove pulse generator from timing case cover.
RA Removing and installing, sealing or replacing timing case cover (S50 / S54)
BMW AG - TIS
09.02.2013 20:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -