3 Series E36 M3 (S50) CONVER
Attach crankpin to connecting rod.
Apply light coat of oil to connecting-rod bearing shells.
Place bearing caps in position, making sure that matching
numbers are paired.
Install new conrod bolts.
Tighten down conrod bearing with special tool 00 9 120 or with
special tool 11 2 110.
Tightening specification,
refer to Technical Data 11 24 1AZ.
Install oil lever.
Install oil pump,
refer to 11 41 000.
Install oil sump,
refer to 11 13 500.
Install cylinder head,
refer to 11 12 500.
RA Removing and installing or replacing all pistons (S50) (engine removed)
BMW AG - TIS
09.02.2013 20:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -