3 Series E36 M3 (S50) CONVER
Remove sprocket wheel and input shaft for VANOS radial piston
pump from exhaust camshaft.
Remove chain.
Important!
Do not damage timing case.
If necessary, machine open-end wrench accordingly.
Fit open-end wrench to hex on intake camshaft.
Important!
Note direction and angle of rotation.
Rotate inlet camshaft inwards with open-end wrench until cam tips
of cylinder 1 are aligned horizontally with camshaft.
Important!
If dismantled incorrectly, i.e. without fixture, there is a risk of
initial damage or failure of camshaft.
Fit special tool 11 3 400 to depress the inlet camshaft and
screw into spark plug threads of cylinders 2 and 5.
Tightening torque,
refer to Technical Data 12 12 1AZ .
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -