3 Series E36 M3 (S50) CONVER
Fit end cover (VANOS bridge) to timing case and tighten down.
Slide VANOS adjustment unit up to timing case.
Fit TDC sensor for cylinder recognition.
Note:
Secure ground tape with screw (7).
Insert screws (1 ... 9) in VANOS adjustment unit and tighten
down in two passes.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B30)
BMW AG - TIS
09.02.2013 20:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
