3 Series E36 M3 (S50) CONVER
Fit new collar nut and secure with Loctite 270.
Brace against shaft and tighten collar nut.
Tightening Torque,
refer to Technical Data 11 36 6AZ
Clean thread in VANOS adjustment unit.
Replace O-ring in cover.
Align recess on cover with filter screw.
Install screws with Loctite 270, refer to BMW Parts Service and
tighten down.
Tightening Torque,
refer to Technical Data 11 36 7AZ
Insert screw connections in solenoid valves.
Fit cover to plug connections.
Fit oil pipe to VANOS adjusting unit.
Tightening Torque,
refer to Technical Data 11 36 9AZ
Assemble engine.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B30)
BMW AG - TIS
09.02.2013 20:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
