3 Series E36 M3 (S50) CONVER
Fit special tool 11 7 350 to VANOS adjustment unit.
Connect up compressed air (2 ... 8 bar).
Disconnect plug connection on solenoid valves on exhaust side.
Connect special tool 12 6 412 in combination with special
tool 12 6 411 (from special tool kit 12 6 410) to solenoid
valves on exhaust side.
Connect special tool 12 6 411 to correct terminals on car
battery.
Press toggle switch on special tool 12 6 412 in direction of
VANOS splined shaft and keep pressed.
At the same time, brace exhaust camshaft on hex head against
direction of rotation until groove in guide bearing is aligned with
groove on first bearing cover.
Note:
If necessary, press toggle switches on special
tool 12 6 412 several times in both directions until
camshaft starts to move.
Disconnect plug connection of solenoid valves on intake end.
Connect special tool 12 6 412 to the solenoid valves on the
intake end.
Press toggle switch on special tool 12 6 412 in direction of
VANOS splined shaft and hold down.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)
BMW AG - TIS
09.02.2013 20:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
