3 Series E36 M3 (S50) CONVER
11 36 520
Replacing VANOS transmission unit
(S50 B30)
Removing intake camshaft,
refer to 11 31 019
Caution!
Use protective vice jaws.
Clamp intake camshaft upright in vice.
Unfasten screws and lift off spline hub.
Installation:
Fit screws without clearance but do not tighten at this stage.
Remove plate springs.
Installation:
Check installed direction.
Fit plate springs with small locating diameter pointing towards
thrust washer (camshaft).
RA Replacing VANOS transmission unit (S50 B30)
BMW AG - TIS
09.02.2013 20:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -