3 Series E36 M3 (S50) CONVER
11 72 041
Replacing drive belt for air pump (S50)
Remove fan coupling with fan shroud,
refer to 17 11 031
Remove underbody protection from front,
refer to 51 47 490
Without air-conditioning compressor:
Loosen screw (1) and remove ribbed drive belt.
Fit new ribbed drive belt.
With air conditioner:
Unfasten screw (1) and remove drive belt for air pump.
Installation note:
Check air-pump drive belt for damage and wear and replace if
necessary.
Installation note:
Ensure ribbed drive belt is correctly installed in grooves of
drive rollers.
Tensioning of ribbed drive belt follows same procedure as
retensioning,
refer to 11 72 039
Preliminary job items do not apply.
RA Replacing drive belt for air pump (S50)
BMW AG - TIS
09.02.2013 21:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -