3 Series E36 M3 (S50) CONVER
Disconnect the rear retaining bracket on left and right sides.
Take off exhaust assembly in downwards direction.
M52/B28
Pull the vacuum hose off of the vacuum pot.
Installation:
Check rubber mounts for damage, replacing them if
necessary.
Preload rubber mount in forwards driving direction by distance A =
15 mm.
Installation:
Check the position of the end pipes to the body-cutout.
If necessary, loosen the flanged joints and rubber
suspensions; align and refasten the exhaust system.
RA Removing and installing the complete exhaust system (M50/B25, M52/B28, S50)
BMW AG - TIS
09.02.2013 22:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
