3 Series E36 M3 (S50) CONVER
Support transmission with a workshop hoist.
Release screws and remove cross-member.
Tightening torque, 23 71 2AZ.
Lever out retaining plate (1) with a screwdriver.
Installation:
Drive in retaining plate (1) with special tool 23 2 470 .
Grip output flange with special tool 23 0 020 and release collar
nut (1) with special tool 23 2 320 .
Tightening torque, 23 21 1AZ.
RA Replacing radial seal for output flange (S6S 420G)
BMW AG - TIS
09.02.2013 22:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
