3 Series E36 M3 (S50) CONVER
Remove left and right heat shields.
Unflange propeller shaft and tie up to one side.
Unclip cable for lambda oxygen sensors and reversing light switch
on cross-member.
Support transmission with a workshop hoist.
Unfasten screws and remove cross member.
Tightening torque, 23 71 2AZ .
Remove selector rod joint from selector shaft.
RA Replacing radial seal on selector shaft (S6S 420G)
BMW AG - TIS
09.02.2013 22:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -