3 Series E36 M3 (S50) CONVER
23 .. ...
Replacing arrester balls on shift rods
(S6S 420G)
Caution!
Select 1st gear.
Remove splash guard.
Release screws (1).
Remove sealing cap (2).
Installation:
Insert screws (1) with washers and Loctite 243.
Tightening torque 23 31 2AZ.
Replace screws (1) with washers and sealing cap (2).
Carefully remove all 3 springs (1) and arrester balls (2) from bores
with a bar magnet.
Caution!
Do not remove dowel pins (3) inbetween.
RA Replacing arrester balls on shift rods (S6S 420G)
BMW AG - TIS
09.02.2013 22:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
