3 Series E36 M3 (S50) CONVER
Clean connection points on wheel housing and coat with zinc dust
paint.
Set welding spots and welding seams on interior of wheel housing
(1), soft top box (2) and internal side member cover (3).
Set welding spots on connection areas for reinforcement plate on
wind cowl (1) and internal wheel housing (2).
Weld together welding spots and seams on inside face of
reinforcement plate, from the inside outwards.
RA Replacing rear left outer section of wheel housing (side panel removed)
BMW AG - TIS
10.02.2013 02:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
