3 Series E36 M3 (S50) CONVER
Expose and open welding spots in the designated areas of the
windshield frame.
Dimension (A) = approx. 70 mm.
Expose and open welded and brazed seams in windshield frame.
Drill out welding spots in connection for door opening and support
carrier.
Detach door pillar behind reinforcement plate for car jacking point
at the height of the lower door hinge.
Note:
Location of the reinforcement point for car jacking point is
visible through opening for front loudspeakers in support
carrier.
Location of welding spots in reinforcement plate on car jacking
point on door pillar.
Illustration on a blank side frame part.
RA Replacing front left or right door pillar (cover for side member removed)
BMW AG - TIS
10.02.2013 02:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
