3 Series E36 M3 (S50) CONVER
51 14 110
Removing and installing/replacing model
designation (emblem) at rear (sedan, coupé,
convertible, M3)
The model sign is glued and cannot be reused after
removal.
The model sign must be installed at room temperature.
Coat nylon string or thread with tenside (e.g. dish
detergent), cut through adhesive layer and remove with
washing benzene.
At paint baking temperatures exceeding 80
°
C, the model
designation must be removed.
Sedan, Coupé, Convertible:
Apply adhesive tape up to upper edge "A" and mark dimensions according to the table.
Dimension in mm
Sedan 316 i - 328 i:
A = 20, B = 33, C = 16
Sedan 318 tds, 325 td, tds:
A = 20, B = 33, D = 20
Coupé 316 i - 328 i:
A = 30, B = 33, C = 16
Convertible 318 i - 328 i:
A = 40, B = 33, C = 16
RA Removing and installing/replacing model designation (emblem) at rear (sedan, cou
BMW AG - TIS
10.02.2013 03:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -