3 Series E36 M3 (S50) CONVER
Pull off left/right retaining pins (1). Lift out left/right clip (2).
Version without handle recess:
Remove finisher strip (3).
Version with handle recess:
See next work step.
Version with handle recess:
Unfasten left/right screws (1) and take off finisher strip.
Tightening torque, refer to Technical Data 54 34 10AZ
Installation:
Install foam strips (1).
Only replace:
Version with handle recess:
Remove plate (1).
Install foam strips (2).
RA Removing and installing / replacing finisher on convertible top lock (electric m
BMW AG - TIS
10.02.2013 05:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -