3 Series E36 M3 (S50) CONVER
Control unit for gear and program indicator
The control unit for gear and program indicator (item 4, Fig. 1) processes all data transmitted by the SMG
control unit via an I bus, such as program/mode, gear selected and selector lever position, and the following
possible fault messages, and transmits these to the gear and program indicator.
List of fault messages:
1
Clutch malfunction
2
Fault in hydraulic unit
3
Transmission malfunction
4
Automatic mode
5
Undefined condition
6
System failure
7
No engine engagement
The control unit for gear and program indicator is installed in the A-pillar on the BMW M3.
Gear and program indicator
The data/information processed in the control unit for gear and program indicator is displayed in the gear
and program indicator (item 3, Fig. 1).
The gear and program indicator is installed in the rev counter in place of the oil temperature gauge.
Gear and program indicator
Overview
S = "S"/sequential mode
6 = 6th gear engaged
+/- = Gear change options
SBT Layout and purpose
BMW AG - TIS
10.02.2013 16:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -