3 Series E36 M3 (S50) COUPE
Unfasten upper screws 1 and 5 from VANOS adjustment unit.
Unscrew end cover (VANOS bridge) on timing case.
Fit special tool 11 5 100 to four screws on crankshaft hub.
Rotate engine engine-wise until groove on pilot bearing in intake
camshaft is aligned with groove in 1st bearing cover.
Important!
Do not loosen bolts of sprocket on VANOS gearbox which are
now accessible.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -