3 Series E36 M3 (S50) COUPE
Tighten down two accessible screws on inlet end of VANOS gear
to 10 Nm.
Tighten down two accessible screws on exhaust end of VANOS
gear to 10 Nm.
Remove special tool 11 2 300.
Fit special tool 11 5 100 to four screws on crankshaft hub.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 21 -