3 Series E36 M3 (S50) COUPE
11 36 520
Replacing VANOS transmission unit (intake or
exhaust ends as appropriate) (S50 B32)
Remove camshafts,
refer to 11 31 019 (S50 B32)
Caution!
Use protective vice jaws.
Exhaust end
Unfasten screws and lift off spline hub.
Caution!
Always use anti-magnetic original screws.
Installation:
Fit screws without clearance but do not tighten at this stage.
Exhaust end
Note:
Plate spring (2) and thrust washer (3) are located in the
splined hub (1).
Installation:
Fit plate spring (2) with small locating diameter facing the
thrust washer (3). Thrust washer is guided into splined hub
with retaining lugs.
Insert plate spring (2) and thrust washer (3) in the splined hub (1).
RA Replacing VANOS transmission unit (intake or exhaust ends as appropriate) (S50 B
BMW AG - TIS
09.02.2013 21:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -