3 Series E36 M3 (S50) COUPE
11 36 565
Replacing solenoid valve for exhaust or
intake side on VANOS adjustment unit (S50
B32)
Remove VANOS adjustment unit,
refer to 11 36 010 .
Unfasten screws (1) for the intake side.
Unfasten screws (2) for the exhaust side.
Important!
Avoid damaging sealing surfaces. If necessary, cover the
sealing surfaces.
Intake solenoid valves (1).
Exhaust solenoid valves (2).
Carefully unfasten solenoid valves by carefully turning to and fro
with pliers and pull them out of their holders.
Important!
Cover bores (1 and 2).
No seal residue must drop into the bores.
Remove seal residue and oil.
Note:
The solenoid valve wiring is no longer secured in housing with
sealing agent.
RA Replacing solenoid valve for exhaust or intake side on VANOS adjustment unit (S5
BMW AG - TIS
09.02.2013 21:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -