3 Series E36 M3 (S50) COUPE
Unfasten heat baffle plate.
Removing fan cowl,
refer to 17 11 031
Removing alternator,
refer to 12 31 020
Removing underbody protection from front of assembly,
refer to 51 47 490
Remove vane pump for power-steering transmission and attach to
one side.
Note:
Lines remain connected.
Disconnect plug connections (1 and 2).
1.
Sensor for engine-oil pressure
2.
Engine-oil-temperature sensor
Remove oil lines from main flow oil filter housing.
Installation note:
Tightening torque,
refer to Technical Data 11 42 8AZ
RA Removing and installing, sealing or replacing main flow oil filter (S50)
BMW AG - TIS
09.02.2013 21:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -