3 Series E36 M3 (S50) COUPE
Unfasten screw and remove sensor for intake camshaft.
Unfasten nuts on bottom of flanges (total of 3 items) and on the
top flanges (total of 6 items) and remove complete throttle body.
(Figure illustrates screw locations)
S50 B30:
Note:
Take care: ceramic flanges!
Risk of breakage!
Installation:
Replace all O-rings (on throttle-valve side). Ensure that dowel
sleeves are located correctly.
RA Removing and installing/replacing throttle body (S50)
BMW AG - TIS
09.02.2013 22:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -