3 Series E36 M3 (S50) COUPE
13 71 000
Removing and installing suction-filter
housing (S50)
Disconnect connector (1) from volume air-mass sensor.
Unscrew bolt (2).
Unfasten hose clip (3) from suction hose.
Loosen screws (4).
Note:
Mass air-mass sensor remains on suction-filter housing.
Pull off intake neck.
Installation:
First fit the suction snorkel.
Lift front of suction-filter housing and remove air hose (1), then lift
in upwards direction to remove.
Installation:
Bend headt shield to one side slightly to connect the air hose.
Installation:
Install housing support in rubber mount.
RA Removing and installing suction-filter housing (S50)
BMW AG - TIS
09.02.2013 22:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
