3 Series E36 M3 (S50) COUPE
23 12 506
Replacing radial seal on input shaft
(S6S 420G)
Special tools required:
•
23 0 490
•
23 2 491
•
23 2 492
Note:
After completion of work, check transmission oil level.
Caution!
Use only the approved gear oil in this manual transmission.
Failure to comply with this requirement will result in serious
damage to the transmission.
Remove transmission.
Remove guide tube.
RA Replacing radial seal on input shaft (S6S 420G)
BMW AG - TIS
09.02.2013 23:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
