3 Series E36 M3 (S50) COUPE
Caution!
Screw bracket down to body and move car immediately to
normal position.
Non-conformance with these procedures could lead to serious
impairment of handling!
Screw bracket down to body -
Tightening Torque,
refer to Technical Data 31 12 7AZ.
- and move car to normal position.
Refer to Technical Data.
Leave vehicle in normal position for at least 30 minutes and avoid
greater bottoming of suspension.
Lubricant will be evaporated after about 30 minutes and control
arm will fit tightly and be correctly positioned in rubber mount.
RA Replacing bracket for control arm
BMW AG - TIS
09.02.2013 23:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -