3 Series E36 M3 (S50) COUPE
Unscrew bolts.
Unfasten left/right screws.
Unfasten left/right screws.
Bend clips forwards and slightly lower frame of slide/tilt sunroof.
Installation:
Fold up back of frame until rear clips can be unfastened.
1.
Gently tighten down rear left/right screws.
2.
Install front screws and tighten down.
3.
Install and tighten down side screws.
4.
Tighten rear screws.
Push slide/tilt sunroof frame backwards and lift out through back
door (or, on touring, through tailgate).
RA Removing and installing complete slide/tilt sunroof (framework/power)
BMW AG - TIS
10.02.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -