bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Windshield Wiper Motor > < 5 RA Removing And Installing_replacing Both Windshield Wiper Arms
Page 2
background image

Fold up wiper arms up to end position and detach in direction of
arrow from drive shaft.

Installation:

Only install in following sequence:

1.

Run wiper motor into rest position.

2.

Switch off wipers.

3.

Fit wiper arms.

4.

Close engine hood.

5.

Fit wiper blades.

6.

Adjust wiper arms.

Adjusting dimensions of wiper arms:

Reference points are the mountings of the wiper blades on the
wiper arms to the sealing lip of the cowl panel.

4-door models:

A = 50 mm

B = 50 mm

2-door:

A = 43 mm

B = 53 mm

RA  Removing and installing/replacing both windshield wiper arms

BMW AG - TIS

10.02.2013  07:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

6 RA Replacing Windshield Wiper Motor > < 5 RA Removing And Installing_replacing Both Windshield Wiper Arms