3 Series E36 M3 (S50) SAL
Installation note:
Check that dowel sleeves are undamaged and correctly
located.
Fit new cylinder-head seal.
Caution!
Cylinder-head bolts must only ever be used once.
No oil is permitted in the threaded bores in the crankcase.
(Risk of cracks, incorrect tightening values).
Installation note:
Fit cylinder head and tighten new screws (lightly oiled) in
sequence 1 ... 14.
Tightening torque,
refer to Technical Data 11 12 6AZ
Note:
For torsion angle adjustment, use special tool 00 9 120 or
special tool 11 2 110.
RA Removing and installing cylinder head (S50)
BMW AG - TIS
09.02.2013 20:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
