3 Series E36 M3 (S50) SAL
Remove axle pin with standard extractor tool over M10 thread.
Remove guide wheel.
Installation:
Install guide wheel in correct direction.
Align opening (1) (positioning of axle pin) towards top.
Replace sealing ring (2).
Remove sliding rail:
Remove retaining ring on axle pin for sliding rail.
Remove axle pin with standard extractor tool over M8 thread.
Remove sliding rail.
RA Dismantling and reinstalling cylinder head - cylinder head removed (S50)
BMW AG - TIS
09.02.2013 20:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -